Page 3 of 3 FirstFirst 123
Results 41 to 59 of 59

Thread: Tekno MT410 custom built by member Revolauncher

          
   
   
  1. #41

    Default Re: Tekno MT410 custom built by member Revolauncher

    Quote Originally Posted by Revolauncher View Post
    What a beast! I'm thinking of selling my TLR 8ight- TE to fund the 1/8 Tekno truggy purchase. There is a difference in performance even I can see now...
    The quality in materials is like nothing I've seen before

  2. #42
    Throttle, Brake, Dammit!!!! Revolauncher's Avatar
    Join Date
    Jan 2008
    Location
    In the bread aisle, Endicott,NY
    Posts
    7,381

    Default Re: Tekno MT410 custom built by member Revolauncher

    I like the design and engineering additions made since gen. 1 products released just 10 years ago. They refine things really well for such a small & young company. Does not hurt that they have an expertise with club level racing. Right where 99% of us operate, most of us will never get sponsored and travel the world racing. They're not too big, yet....
    -some say I am the Stig, but I'm just a New York cousin.

  3. #43

    Default Re: Tekno MT410 custom built by member Revolauncher

    Will finally have the beast out this weekend for the first time...

  4. #44

    Thumbs up Re: Tekno MT410 custom built by member Revolauncher

    Quote Originally Posted by vettehigh View Post
    Will finally have the beast out this weekend for the first time...
    Just took it out today....what a tank. Amazing piece of quality

    Only one problem, the ESC came loose toward the end. I took the HobbyWing tape off and used 91% alcohol. Just ordered Parma pro servo tape to go in its place
    Last edited by vettehigh; 06-28-2017 at 08:23 PM.

  5. #45
    Bronze Level BYT Member lilpanther's Avatar
    Join Date
    Dec 2010
    Location
    South Carolina
    Posts
    1,792

    Default Re: Tekno MT410 custom built by member Revolauncher

    Awesome. It always sucks when the ESC's come flying loose, I destroyed a Mamba monster because of that.
    7:30 PM [SHORTBUS25] yea i knwo how to google y do i need it for
    7:30 PM [SHORTBUS25] i dont have no question for u
    7:30 PM [SHORTBUS25] to goggle
    7:31 PM [fishyblob] its google, not goggle
    7:31 PM [fishyblob] you wear goggles, google is a number
    7:31 PM [fishyblob] sheesh
    7:31 PM [SHORTBUS25] same diff its looks the same
    7:53 PM [SHORTBUS25] i think the pinion is a 78t

    Quote Originally Posted by cbaker65 View Post
    DUDE
    That was so 80...
    My Fleet


  6. #46

    Default Re: Tekno MT410 custom built by member Revolauncher

    Quote Originally Posted by lilpanther View Post
    Awesome. It always sucks when the ESC's come flying loose, I destroyed a Mamba monster because of that.
    In the time being, I'm using this:

    http://www.scotchbrand.com/3M/en_US/...4603618&rt=rud

  7. #47

    Thumbs up M2c racing front/rear shock tower support braces

    Just got these today and installed - front/rear

    m2c6760
    m2c6761

    I also added Tekno M4 aluminum serrated locknuts in gun metal (TKR1213 - 4 needed)

    http://m2cracing.com/category.sc?categoryId=114
    Last edited by vettehigh; 07-15-2017 at 03:54 PM.

  8. #48

    Default Re: Tekno MT410 custom built by member Revolauncher

    What an amazing piece of an equipped MT the MT410 is

    So well put together and drives like a Cadillac too

  9. #49

    Red face TBR Stunt Truck Rear Bumper

    My new TBR bumper with stainless steel locknuts/bolts/washers



    Last edited by vettehigh; 08-12-2017 at 02:15 PM.

  10. #50
    Bronze Level BYT Member lilpanther's Avatar
    Join Date
    Dec 2010
    Location
    South Carolina
    Posts
    1,792

    Default Re: Tekno MT410 custom built by member Revolauncher

    Nice looking parts. I've always loved TBR bumpers.
    7:30 PM [SHORTBUS25] yea i knwo how to google y do i need it for
    7:30 PM [SHORTBUS25] i dont have no question for u
    7:30 PM [SHORTBUS25] to goggle
    7:31 PM [fishyblob] its google, not goggle
    7:31 PM [fishyblob] you wear goggles, google is a number
    7:31 PM [fishyblob] sheesh
    7:31 PM [SHORTBUS25] same diff its looks the same
    7:53 PM [SHORTBUS25] i think the pinion is a 78t

    Quote Originally Posted by cbaker65 View Post
    DUDE
    That was so 80...
    My Fleet


  11. #51

    Default Re: TBR Stunt Truck Rear Bumper

    Quote Originally Posted by vettehigh View Post
    My new TBR bumper with stainless steel locknuts/bolts/washers



    Updated stainless hardware
    Last edited by vettehigh; 08-13-2017 at 09:39 AM.

  12. #52

    Cool Re: Tekno MT410 custom built by member Revolauncher

    Doing some updates this upcoming week on the MT410 - courtesy of "Revo"

    Going from my 2200kv HW to a TenShock 1950KV 4.5Y 6 Pole along with shock upgrades (CNC conical pistons/TiNi shafts etc.)

    Do I need to do this, NO - but I'm going to and having the top gear mechanic (Revo) makes my decision easier

  13. #53

    Default Motor weight

    Motor weight:

    The new Tenshock motor weighs 360g and the HW I had is 418g
    Last edited by vettehigh; 10-18-2017 at 06:20 PM.

  14. #54
    Throttle, Brake, Dammit!!!! Revolauncher's Avatar
    Join Date
    Jan 2008
    Location
    In the bread aisle, Endicott,NY
    Posts
    7,381

    Default Re: Motor weight

    Quote Originally Posted by vettehigh View Post
    Motor weight:

    The new Tenshock motor weighs 360g and the HW I had is 418g
    They lie a lot! The Tenshock X802L V2 is every bit as heavy as the 4274 Hobbywing. Here is a pic. of the Tekno SCT410.3 chassisskins @mattoxdesigns.com. IMG_5719.JPG It says Ford on the oil pan.
    -some say I am the Stig, but I'm just a New York cousin.

  15. #55

    Thumbs up Re: Motor weight

    Quote Originally Posted by Revolauncher View Post
    They lie a lot! The Tenshock X802L V2 is every bit as heavy as the 4274 Hobbywing. Here is a pic. of the Tekno SCT410.3 chassisskins @mattoxdesigns.com. IMG_5719.JPG It says Ford on the oil pan.
    Agree...the TenShock is heavier than the HW and Tekin
    Last edited by vettehigh; 10-19-2017 at 08:08 AM.

  16. #56

    Thumbs up Final upgrade completed - custom built by member Revolauncher

    Just changed yesterday:

    *TenShock 1950KV 6 Pole Brushless Motor Blue #X802LV2 /4.5Y (It's huge/heavy )
    *Tekno 16T pinion gear
    *Tekno RC Shock Shafts w/TiNi Coating (F/R) TKR6017T / TKR6061T
    *Tekno RC Shock Pistons CNC 8x1.3mm (F/R) TKR6051
    *Mugen Seiki Shock Oil #700 Weight






    Pictures of finished project: https://imgur.com/a/U60et

    Final list of all completed Tekno items:

    *Badhorsie Shock Covers *T-Bone Racing Nylon Front Bumper/Rear Wheelie Bar Bumper/Rear Mud Guards
    *Tonka Custom Painted JConcepts 0326 Body - Ford F-250 SuperCab Monster Truck
    *SMC LiPo: True Spec Premium 14.8V 5200mAh 112Amps/90C Capacity
    *Mattox Designs Chassis Protector *Dusty Motors Shroud
    *Hobbywing EZRUN MAX 8 ESC
    *TenShock 1950KV 4.5Y 6 Pole Brushless Motor Blue 1:8 #X802LV2 /4.5Y

    Tekno RC 1/10 MT410 Pro 4x4 Kit
    Futaba 3PRKA 3-Channel FHSS System
    Tekno RC Pinion Gear 16T M5
    Tekno RC Spur Gear 44T Hardened - TKR5115
    Tekno RC Aluminum Rear Hubs – Gunmetal TKR5199A
    Tekno RC CNC Split Center Diff Mounts – Aluminum TKR5262
    Tekno RC Aluminum Servo Horn Double Hole 25T Spline - TKR5253B
    Hitec HSB-9380TH Brushless Digital Ultra Torque w/PAD
    Tekno RC Shock Caps – Aluminum TKR6003
    Tekno RC Shock Cartridge Caps - Aluminum TKR6015
    Tekno RC CNC Delrin Shock Cartridge Set - TKR6146
    Tekno RC Shock Adjustment Nuts – Aluminum TKR6013
    Tekno RC Shock Shafts w/TiNi Coating TKR6017T / TKR6061T
    Tekno RC Shock Pistons CNC 8x1.3mm TKR6051
    Tekno RC Steering Servo Brace – Carbon fiber TKR5060C
    Tekno RC Rear Arm Mud Guard - TKR5433
    Pro-Line Shockwaves 3.8" MT Tires - 1193-13
    Tekno RC Wheel Nut T Logo 17mm Serrated - TKR5116B
    M2C Racing Rear Shock Tower Brace - M2C6705
    M2C Racing Front/Rear Upper Shock Tower Support Braces M2C6760 / M2C6761
    M2C Racing Short Rear Center Brace M2C6755
    Stainless Steel & Aluminum Nuts/Bolts

    Thank you member "Revolauncher"
    Last edited by vettehigh; 11-07-2017 at 11:33 AM.

  17. #57

    Thumbs up Re: Tekno MT410 custom built by member Revolauncher

    MC2 Racing short rear center brace and new TBR nylon rear mud guards



    Last edited by vettehigh; 11-07-2017 at 11:30 AM.

  18. #58
    Bronze Level BYT Member lilpanther's Avatar
    Join Date
    Dec 2010
    Location
    South Carolina
    Posts
    1,792

    Default Re: Tekno MT410 custom built by member Revolauncher

    Awesome. So how are you liking it?
    7:30 PM [SHORTBUS25] yea i knwo how to google y do i need it for
    7:30 PM [SHORTBUS25] i dont have no question for u
    7:30 PM [SHORTBUS25] to goggle
    7:31 PM [fishyblob] its google, not goggle
    7:31 PM [fishyblob] you wear goggles, google is a number
    7:31 PM [fishyblob] sheesh
    7:31 PM [SHORTBUS25] same diff its looks the same
    7:53 PM [SHORTBUS25] i think the pinion is a 78t

    Quote Originally Posted by cbaker65 View Post
    DUDE
    That was so 80...
    My Fleet


  19. #59

    Default Re: Tekno MT410 custom built by member Revolauncher

    Quote Originally Posted by lilpanther View Post
    Awesome. So how are you liking it?
    Just finished the final upgrades last week. To be honest, hardly had it out. Such top quality by far though.

Page 3 of 3 FirstFirst 123

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •