Results 1 to 3 of 3

Thread: Deformed tire foam

  1. #1

    Default Deformed tire foam

    I have some old stock lst2 tires. The foam is a bit deformed is there any way to get it back in a useable shape. The one isn’t two bad, but the other is pretty smash on one side. Thanks for any advice.

  2. #2

    Default Re: Deformed tire foam

    If it were me i would un glue one side of the tire and just work it back. If that dont work well might as well un glue the other side. Then just re assemble.

  3. #3
    BYT Life Member E-savage's Avatar
    Join Date
    Sep 2007
    Location
    Woodbridge, Ontario
    Posts
    6,905

    Default Re: Deformed tire foam

    You can put it in a raised bath of acetone to dissolve the glue. Pretty much the only way you can work with the foam once the tires are glued.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •