Hi, been a while! Sorry if wrong section, but I'm having serious problems with my stock vxl drive train. Started off with heat cut off kicking in quite soon after starting, so regularly pausing to cool is a requirement, then yesterday a motor cable snapped a connector (the yellow on on motor side) and since sorting that out it'll jerk a load then heat cut off within 5 seconds, and all cables and esc are kicking out ALOT of heat, however if I turn off Lipo low voltage cut off off it'll drive, but only once moving and about third power.
Is my esc shot? Motor? Or battery?
Btw, 3s 45c 5000mah Lipo, no other batteries or cars to try out.