Results 1 to 2 of 2

Thread: help with revo with a dynamite mach 2 .19

  1. #1

    Default help with revo with a dynamite mach 2 .19

    i have a brand new mach 2 .19 motor in my revo and it will not run well!! the header will not seal would that make it not run( it kinda runs but i have to prime the **** out of it then it wont idle) i had it running for a little but the other day but once it got hot it just died!! i broke it in it was fine and running good but now its hard as **** to get it to start and there is air in the fuel feed lines is all this caused by the leaking header??

  2. #2
    Throttle, Brake, Dammit!!!! Revolauncher's Avatar
    Join Date
    Jan 2008
    Location
    In the bread aisle, Endicott,NY
    Posts
    7,401

    Default Re: help with revo with a dynamite mach 2 .19

    Yes a leaky header, in essence is like losing the prime on a fuel pump, it stops pushing fuel to the carburetor....Fix that and it should run like a champ.
    -some say I am the Stig, but I'm just a New York cousin.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •