Results 1 to 9 of 9

Thread: mini e revo diffs

  1. #1
    Avid BYT Member chazekxt's Avatar
    Join Date
    Nov 2008
    Location
    ks
    Posts
    1,019

    Default mini e revo diffs

    going to pick up a nice e revo but the guy said it was clicking in reverse so i guess its needs diffs?and how hard are they to replace?
    slash 2wd
    vxl rustler
    d8t e tekin power
    tacon valor
    km t1000a

  2. #2
    Silver Level BYT Member beatnrcs's Avatar
    Join Date
    Jan 2011
    Location
    vancleave ms
    Posts
    2,442

    Default Re: mini e revo diffs

    Very easy to replace the diffs,but make sure the bearings get changed or you'll be doing it again when a bearing goes bad.It could just be a stick or something in the driveline.

  3. #3
    Veteran BYT Member usafmoore67's Avatar
    Join Date
    Mar 2011
    Location
    Langley AFB, Virginia
    Posts
    1,224

    Default Re: mini e revo diffs

    Wow, I just happened to need to do the same thing lol I gotta tear the diffs apart due to (hey Beatn, make sure to tell Shadow bout this) MUD, in the center trans and diffs with no grease lol jus dry mud
    HPI Baja 5SC SS ~ HPI Vorza Flux ~ Axial Wraith


    ~YouTube Channel~
    http://www.youtube.com/user/usafmoore67/featured

  4. #4
    Avid BYT Member jimbo74's Avatar
    Join Date
    Feb 2010
    Location
    Nor*Cal
    Posts
    873

    Default Re: mini e revo diffs

    make sure to shim the diffs while rebuilding

  5. #5

    Default Re: mini e revo diffs

    i agree with jimbo be sure to shim diffs when rebuilt or you will keep blowing through them like butter.
    beat it til itsBROKEN

  6. #6
    Avid BYT Member chazekxt's Avatar
    Join Date
    Nov 2008
    Location
    ks
    Posts
    1,019

    Default Re: mini e revo diffs

    this thing is like new from the looks of it so i think i can just shim them???? i guess u can use ae shims? 21141 part number?
    Last edited by chazekxt; 03-05-2012 at 10:44 AM.
    slash 2wd
    vxl rustler
    d8t e tekin power
    tacon valor
    km t1000a

  7. #7

    Default Re: mini e revo diffs

    yup you can use any shim that will fit properly and give you the mesh you are looking for. ive used small washers before
    beat it til itsBROKEN

  8. #8
    Avid BYT Member chazekxt's Avatar
    Join Date
    Nov 2008
    Location
    ks
    Posts
    1,019

    Default Re: mini e revo diffs

    ok thanks.
    slash 2wd
    vxl rustler
    d8t e tekin power
    tacon valor
    km t1000a

  9. #9

    Default Re: mini e revo diffs

    Yeah, I couldn't agree more, Diffs on the MERV are Simple. Seconding the Shims, and Ceramic Bearings...

    Mike
    Mugen MBX5r
    1/16 Merv
    Trinity Now

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •