Results 1 to 5 of 5

Thread: Paasche airbrush issue??

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    New BYT Member
    Join Date
    Mar 2010
    Location
    California
    Posts
    24

    Default Paasche airbrush issue??

    Man, I'm really trying to stick to this and practice 1-2 hrs everyday. I seem to be getting paint before I pull back on the trigger??

  2. #2
    Silver Level BYT Member gotnitro?'s Avatar
    Join Date
    Oct 2005
    Location
    Macon, GA
    Posts
    2,584

    Default Re: Paasche airbrush issue??

    Your fuild needle isn't set correctly, it's sounds like its set a little to far back. If you look at the rear of the gun there should be a little nut that goes around the needle. Loosen it then push the needle up just a hair and try that.

  3. #3
    New BYT Member
    Join Date
    Mar 2010
    Location
    California
    Posts
    24

    Default Re: Paasche airbrush issue??

    I tried that but nothing. I went back to my old needle which is a vln3 with no prob. I think the needle which was supposed to be a direst fit VN1 is the problem. Anyone know of a household item that I could use for a needle lubricant??

  4. #4
    BYT Member DaveC's Avatar
    Join Date
    Feb 2009
    Location
    Naperville, IL
    Posts
    496

    Default Re: Paasche airbrush issue??

    I presume you are using the needle that matches the nozzle size? They are a set.

    Otherwise, you might inspect the nozzle for a split, or out-of-round condition.
    got paint?

  5. #5
    New BYT Member
    Join Date
    Mar 2010
    Location
    California
    Posts
    24

    Default Re: Paasche airbrush issue??

    Yeah, 10-4...I recently bought a smaller size needle and I think they sold me the one for the wrong set.
    Any ideas for needle lube ???

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •