should be able to get into my LHS tomorrow, and might just take it for a few laps around their inclosed dirt track, and see what i can break while im there
should be able to get into my LHS tomorrow, and might just take it for a few laps around their inclosed dirt track, and see what i can break while im there
Got the spur gear and pinion up to 32P. Now i believe that the motor timing/punch control are messed up, and it barely will move, if im lucky. Anybody willing to let me borrow their castle link to program it?
check the start power on it ,it might be that. You can use you're radio and just follow the beeps but that's not fun at all.
3:51 PM [fishyblob] there is no polite in byt chat. only debauchery, violence, and sin
i looked at the manual for the programming by radio, and it got SO confusing, that i didnt even want to try it, but i guess i am going to be forced that way. but it doesnt even seem like a turbo lag, it just doesnt perform period.
AHHHHHH, this is starting to make me mad. My cusins 12T pede should not be able to out run my rusty the way it sits. and we were both using the same batts
Okay, got a programming card yesterday, and got it programmed the way i want it. It is now in the batts. I really wasnt wanting to drop more $ into it.
maybe change your gearing? Watch the temps if you do though.
Looks pretty sweet so how insane is that motor n esc combo
Never Fear, Never Quit, Never Give Up, Never Back Down
right now, i am still running with the old 3300 NiMH batteries. trying to save up to get 2 5000 3s lipos and a charger at the same time
but with the close to 6 year old batteries, it still pulls close to 30
yeah time to go lipo those nimh batts are holding you waaaayyyyy back on performance i am running 2s lipo with a 3300kv motor and 26/84 gearing in my 2wd pede and am running about 40-45mph
watch out for that oops too late time to order parts