was wondering what motor to buy after the stock burns out thanks
was wondering what motor to buy after the stock burns out thanks
traxxas revo
traxxas stampede with vxl3 & 3s lipo
losi night crawlar
A 55 turn Lathe motor. Will crawl slow as heck, but will pretty much crawl over everything. My manager put one in a customer's who does home inspections with his Night Crawler.
Nah, he didn't slam into you; he didn't bump you; he didn't nudge you; he rubbed you. And rubbin, son, is racin'. -Harry Hogge (Days of Thunder)
Can still use the losi esc or due you have to buy there esc
traxxas revo
traxxas stampede with vxl3 & 3s lipo
losi night crawlar
The Losi ESC worked.
Nah, he didn't slam into you; he didn't bump you; he didn't nudge you; he rubbed you. And rubbin, son, is racin'. -Harry Hogge (Days of Thunder)
The stock motor is 55 turn 540 size or at this point its the wrong gears stock is 20 tooth pinion=60.51 ratio is this to high to low im kind of lost with gear ratio thanks for the help
traxxas revo
traxxas stampede with vxl3 & 3s lipo
losi night crawlar
looking to get a better servo this is the stock one
An ideal step up for RTR and 1/8 throttle servos this Extra High Torque Servo provides over 140 oz-in of torque reliably through ball bearing-supported metal gears.
This servo is perfect for 1/10 steering, 1/8 throttle, and 1/8 Monster trucks that will benefit from the extra torque and power. The metal output shaft features 23 splines – the same as Losi, JR, Spektrum, and Airtronics.
Features
Metal gear train that provides the extra durability needed for high loads
Unmatched support and durability, as well as precision positioning, provided by ball bearing on the output gear
23-tooth spline output shaft
Product Specifications
Size Category:Standard
Type: Digital
Torque:140 oz-in @ 6.0V
Speed:.18 sec/60 degrees @ 6.0V
Bushing Or Bearing:Bearing
Gear Type:Metal
traxxas revo
traxxas stampede with vxl3 & 3s lipo
losi night crawlar