Results 1 to 6 of 6

Thread: losi night crawler

  1. #1
    BYT Member swfd27's Avatar
    Join Date
    Nov 2009
    Location
    willimantic ct
    Posts
    126

    Default losi night crawler

    was wondering what motor to buy after the stock burns out thanks
    traxxas revo
    traxxas stampede with vxl3 & 3s lipo
    losi night crawlar

  2. #2
    BYT Life Member chiefmasterbeast's Avatar
    Join Date
    Jul 2008
    Location
    Rockville, MD
    Posts
    4,764

    Default Re: losi night crawler

    A 55 turn Lathe motor. Will crawl slow as heck, but will pretty much crawl over everything. My manager put one in a customer's who does home inspections with his Night Crawler.
    Nah, he didn't slam into you; he didn't bump you; he didn't nudge you; he rubbed you. And rubbin, son, is racin'. -Harry Hogge (Days of Thunder)

  3. #3
    BYT Member swfd27's Avatar
    Join Date
    Nov 2009
    Location
    willimantic ct
    Posts
    126

    Default Re: losi night crawler

    Can still use the losi esc or due you have to buy there esc
    traxxas revo
    traxxas stampede with vxl3 & 3s lipo
    losi night crawlar

  4. #4
    BYT Life Member chiefmasterbeast's Avatar
    Join Date
    Jul 2008
    Location
    Rockville, MD
    Posts
    4,764

    Default Re: losi night crawler

    The Losi ESC worked.
    Nah, he didn't slam into you; he didn't bump you; he didn't nudge you; he rubbed you. And rubbin, son, is racin'. -Harry Hogge (Days of Thunder)

  5. #5
    BYT Member swfd27's Avatar
    Join Date
    Nov 2009
    Location
    willimantic ct
    Posts
    126

    Default Re: losi night crawler

    The stock motor is 55 turn 540 size or at this point its the wrong gears stock is 20 tooth pinion=60.51 ratio is this to high to low im kind of lost with gear ratio thanks for the help
    traxxas revo
    traxxas stampede with vxl3 & 3s lipo
    losi night crawlar

  6. #6
    BYT Member swfd27's Avatar
    Join Date
    Nov 2009
    Location
    willimantic ct
    Posts
    126

    Default Re: losi night crawler

    looking to get a better servo this is the stock one
    An ideal step up for RTR and 1/8 throttle servos this Extra High Torque Servo provides over 140 oz-in of torque reliably through ball bearing-supported metal gears.

    This servo is perfect for 1/10 steering, 1/8 throttle, and 1/8 Monster trucks that will benefit from the extra torque and power. The metal output shaft features 23 splines – the same as Losi, JR, Spektrum, and Airtronics.

    Features

    Metal gear train that provides the extra durability needed for high loads
    Unmatched support and durability, as well as precision positioning, provided by ball bearing on the output gear
    23-tooth spline output shaft
    Product Specifications

    Size Category:Standard
    Type: Digital
    Torque:140 oz-in @ 6.0V
    Speed:.18 sec/60 degrees @ 6.0V
    Bushing Or Bearing:Bearing
    Gear Type:Metal
    traxxas revo
    traxxas stampede with vxl3 & 3s lipo
    losi night crawlar

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •