Results 1 to 8 of 8

Thread: Who has the RC10LS From Associated

          
   
   
  1. #1
    BYT Member mike-susieq1's Avatar
    Join Date
    Feb 2011
    Location
    California
    Posts
    222

    Default Who has the RC10LS From Associated

    I have a RC10LS, i was wondering who has this car. I was wondering whats the best brushless system to put into this car thats not too pricey? maybe around 100-125 or so. Also whats the best company for foams for this?
    Last edited by mike-susieq1; 03-22-2011 at 10:40 PM.

  2. #2
    BYT Member mike-susieq1's Avatar
    Join Date
    Feb 2011
    Location
    California
    Posts
    222

    Default Re: Who has the RC10LS From Associated

    i guess no one here has this car or not too many people have on road cars anymore, ooh well thought i would post some questions about this car.

  3. #3
    BYT Active Member little_bob's Avatar
    Join Date
    Dec 2009
    Location
    Edmonton Canada
    Posts
    724

    Default Re: Who has the RC10LS From Associated

    i don't have that car. it depends what you are planning to use it for. i have one of these http://hobbyking.com/hobbyking/store...idProduct=9821 in the driftstar and the 11.5t version on the evader. if you want to race, a lot of onroad tracks have a 17t minimum rule so that motor will be way too fast, but if you're not going to race, just gear that conservatively.
    35cc KM Baja T1000 Terminator
    metal e-maxx
    duratrax evader st 4s lipo 3350kv rocket
    exceedrc driftstar
    Tamiya Falcon
    Kyosho Laser zx-5
    Tamiya Dark Impact
    Slash 4x4
    Summit
    My YouTube

  4. #4
    BYT Member mike-susieq1's Avatar
    Join Date
    Feb 2011
    Location
    California
    Posts
    222

    Default Re: Who has the RC10LS From Associated

    was thinking of going with this: http://www3.towerhobbies.com/cgi-bin...&I=LXXWH7&P=SM
    or the 6900kv or higher for speed and i dont plan on track racing just playing

  5. #5
    BYT Active Member little_bob's Avatar
    Join Date
    Dec 2009
    Location
    Edmonton Canada
    Posts
    724

    Default Re: Who has the RC10LS From Associated

    yes you could get that, don't think that you need that esc, i'd take the sidewinder instead since the motor is 3s max. stick a nice 2s in there, will be fine, and a 3s for when you want to go crazy. i think normal on road tires are better for road, and not foams, and since you're not racing, i wouldn't buy them.
    35cc KM Baja T1000 Terminator
    metal e-maxx
    duratrax evader st 4s lipo 3350kv rocket
    exceedrc driftstar
    Tamiya Falcon
    Kyosho Laser zx-5
    Tamiya Dark Impact
    Slash 4x4
    Summit
    My YouTube

  6. #6
    BYT Member mike-susieq1's Avatar
    Join Date
    Feb 2011
    Location
    California
    Posts
    222

    Default Re: Who has the RC10LS From Associated

    Quote Originally Posted by little_bob View Post
    yes you could get that, don't think that you need that esc, i'd take the sidewinder instead since the motor is 3s max. stick a nice 2s in there, will be fine, and a 3s for when you want to go crazy. i think normal on road tires are better for road, and not foams, and since you're not racing, i wouldn't buy them.
    i was thinking of going with road tires but cant find any that will fit with the 4 bolt on type on the back tires. i could only find foams from like bsr and jaco. if you know of a place that carries road tires can i get a site. thanks

  7. #7

    Default Re: Who has the RC10LS From Associated

    Jaco pan foams work pretty well. I always ran purple or a similar hard compound on mine.

    My pan car was pretty with a 27T motor with a 6-cell pack.

    A pan car with a Velineon motor and 2S would be incredibly fast.

  8. #8
    BYT Member mike-susieq1's Avatar
    Join Date
    Feb 2011
    Location
    California
    Posts
    222

    Default Re: Who has the RC10LS From Associated

    Quote Originally Posted by Southpaw41 View Post
    Jaco pan foams work pretty well. I always ran purple or a similar hard compound on mine.

    My pan car was pretty with a 27T motor with a 6-cell pack.

    A pan car with a Velineon motor and 2S would be incredibly fast.
    thats what i was thinking but might be looking to sell it instead. would like to set this up but need to fix 4tec first since this is rtr for now with a titan 12t and xl-5 so its good for now, if i come across something cheap better than what i have then i'll put that in. thanks for the replys

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •