Results 1 to 3 of 3

Thread: Mamba max pro problem

  1. #1
    Bronze Level BYT Member sweetride4me's Avatar
    Join Date
    Jan 2006
    Location
    Southern NH
    Posts
    1,796

    Default Mamba max pro problem

    Ok so I have an mmp and it seems to be acting weird, but maybe it's the motor... not sure. When I turn it one and everything is hooked up, no matter which direction I move the trigger it goes in reverse. I checked out my receiver on my other truck and its finr, so I know it isn't my radio system. The motor is sensored and thats hooked up... just very weird. Anyone experienced this??? Any thoughts????

    Thanks for any help in advance.


    When life gives you lemons....squeeze them in someones eyes and run like ****

  2. #2
    BYT official flamer of noobs suicideneil's Avatar
    Join Date
    Jun 2006
    Location
    Dartmouth, Devon, UK
    Posts
    8,318

    Default Re: Mamba max pro problem

    You probably need to swap the motor wires around- they have to be in a certain order when you have the sensor harness hooked up for sensored operation. If you unplug the sensor wire, then you'll probably get forwards & reverse back ( even if they are back to front on the throttle- just swap two motor wires around to reverse the direction of rotation ).

    The fountain of r/c knowledge: robotwars.00server.com
    Flaming noobs since June '06

  3. #3
    Bronze Level BYT Member sweetride4me's Avatar
    Join Date
    Jan 2006
    Location
    Southern NH
    Posts
    1,796

    Default Re: Mamba max pro problem

    Taking the sensor wire out seems to have worked... Thanks Neil!!!!


    When life gives you lemons....squeeze them in someones eyes and run like ****

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •