Page 2 of 2 FirstFirst 12
Results 21 to 24 of 24

Thread: Tips, Advice, and information for the rattle can painter

  1. #21

    Default Re: Tips, Advice, and information for the rattle can painter

    Thanks for the writeup but my biggest problem is masking the windows and (faux) rollbar on my truck body. Any advice?

  2. #22

    Default Re: Tips, Advice, and information for the rattle can painter

    The one I use most is pactra because it looks very well and easy to use. First, you pick out the body you want and cut it out to fit your truck flush, then you get a sharpie and line your truck body up to the holes and put a dot there with your marker and then you get your hole driller and drill all four of them out. Once that is done, then you spread on liquid mask and draw your design on it and cut it out as you need it with your choice of colored paint. Peel the rest off whrn yopur done and bam.A NEW CUSTOM SELF BUILT BODY!!!!!!

  3. #23
    BYT Member aliencehobbies's Avatar
    Join Date
    Jan 2012
    Location
    Trufant Michigan
    Posts
    282

    Default Re: Tips, Advice, and information for the rattle can painter

    really good advice thanks

  4. #24

    Default Re: Tips, Advice, and information for the rattle can painter

    This is awesome information that I can't wait to use!!! My eye has been on a classic Chevy body in a root beer color for my revo!

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •