The FullForce RC Aluminum 2-Point Roll Bar was easy to install and included good instructions on how to get the job done. Two holes need to be drilled in the chassis for mounting. No big deal. The hardware to bolt the roll bar in is included as well as an allen wrench to do the job. Nice touch FullForce! Our OS engine was the carb linkage on the right side so we had to make a slight bend to make everything fit nicely. We also added a piece of fuel line over the linkage to prevent any servo twitching (linkage bumping the roll bar). It works great!

    We have used other roll bars that bolt into the bulkheads etc and they work well also. However the FullForceRC roll bar is lighter in weight than others we have used and that's a bonus, especially when we have added some weight with all the aluminum goodies on the truck. It is inexpensive and good cooling head/engine protection!!!

    We are running a Dynamite Ultra Performance head on the truck and the bar is higher than the head (see the picture to the left). If you are running a larger (taller) cooling head than this, you might wish the roll bar was slightly higher for additional protection. Visit the Full Force RC web site.
  • Other BYT Sites

    BYT Facebook BYT YouTube BYT Twitter BYT Merchandise BYT MySpace
  • BYT Sponsors

    FullForce RC - For all your RC needs!

    Axial Racing!

  • Monthly Photo Contest Winner

    Winner: popasqat 
Date: January 2013 
Contest Theme: Winter Time Weather
    Winner: popasqat Date: January 2013 Contest Theme: Winter Time Weather