Chris
12-13-2003, 09:53 AM
http://www.kyosho.com/cars/kyod75-3b.jpg
http://www.beatyourtruck.com/raw_video/mini-z-monster.jpe
http://www.kyosho.com/cars/kyod75.html
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXFZL1**&P=7
Ready-to-run with pre-installed electronics and radio equipment
Small size makes it easy to pop wheelies and jump in a small area
Coil-over spring shocks at all wheels for realistic suspension
action
V-tread pattern tires on stylish wheels.
Stock F-130 electric motor delivers strong power output for exciting
off-road action
Rugged pre-painted polystyrene body protected from scratches by a
special Gloss-Coat finish
Mini-Z Overland series hop-ups are compatible with Mad Force
Specially designed mini servo to provide fully proportional steering,
even at low speeds
Receiver, servos and linkages are all pre-installed in the car for
convenience
Kyosho Perfex digital proportional 2-channel radio has the following:
Adjustable steering dual rate
Steering and throttle trims
Servo reversing switch
LED battery power indicator
Retractable antenna
Charging jack for optional NiCD rechargeable battery (not included,
see COMMENTS)
Micro receiver with efficient, FET high-frequency amplifier
One Micro Servo and high frequency electronic speed control, that
provides, forward, reverse AND braking
INCLUDES: One ready-to-run Kyosho Mini-Z Mad Force Monster Truck with blue and
yellow color scheme
Perfex KT-2 Radio System
One Instruction Manual
REQUIRES: Attaching the body to the chassis
Installing transmitter antenna into transmitter
Installing alkaline batteries into transmitter and truck
(4) AAA size alkaline batteries for the truck, EVEP1212
(8) AA size alkaline batteries for the transmitter, EVEP1205
SPECS:
Weight:
Body-
Length: 6.7" (170mm)
Height: 2.4" (61mm)
Width: 5" (127mm)
Wheelbase: 3.5" (90mm)
COMMENTS: Charging Jack is functional. Use a Futaba-style transmitter
charging system with this jack, HCAP6010 or DTXP4010.
For the optional bearing set, use DTXC1386.
I think I am in love! 8)
http://www.beatyourtruck.com/raw_video/mini-z-monster.jpe
http://www.kyosho.com/cars/kyod75.html
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXFZL1**&P=7
Ready-to-run with pre-installed electronics and radio equipment
Small size makes it easy to pop wheelies and jump in a small area
Coil-over spring shocks at all wheels for realistic suspension
action
V-tread pattern tires on stylish wheels.
Stock F-130 electric motor delivers strong power output for exciting
off-road action
Rugged pre-painted polystyrene body protected from scratches by a
special Gloss-Coat finish
Mini-Z Overland series hop-ups are compatible with Mad Force
Specially designed mini servo to provide fully proportional steering,
even at low speeds
Receiver, servos and linkages are all pre-installed in the car for
convenience
Kyosho Perfex digital proportional 2-channel radio has the following:
Adjustable steering dual rate
Steering and throttle trims
Servo reversing switch
LED battery power indicator
Retractable antenna
Charging jack for optional NiCD rechargeable battery (not included,
see COMMENTS)
Micro receiver with efficient, FET high-frequency amplifier
One Micro Servo and high frequency electronic speed control, that
provides, forward, reverse AND braking
INCLUDES: One ready-to-run Kyosho Mini-Z Mad Force Monster Truck with blue and
yellow color scheme
Perfex KT-2 Radio System
One Instruction Manual
REQUIRES: Attaching the body to the chassis
Installing transmitter antenna into transmitter
Installing alkaline batteries into transmitter and truck
(4) AAA size alkaline batteries for the truck, EVEP1212
(8) AA size alkaline batteries for the transmitter, EVEP1205
SPECS:
Weight:
Body-
Length: 6.7" (170mm)
Height: 2.4" (61mm)
Width: 5" (127mm)
Wheelbase: 3.5" (90mm)
COMMENTS: Charging Jack is functional. Use a Futaba-style transmitter
charging system with this jack, HCAP6010 or DTXP4010.
For the optional bearing set, use DTXC1386.
I think I am in love! 8)